T300S Pro

Big space for more possibilities

The newly upgraded TronHoo3D BestGee series FDM/FFF T300S Pro, the printing space size upgraded to 300*300*400mm, and the full-color touch screen has also been upgraded to 3.4 inches. It is equipped with other high-performance configurations such as automatic leveling, rapid heating, continuous printing after a power failure, and precise materials feeding. It aims to provide consumers with an FDM 3D printer that combines cost-effectiveness and high performance for more people can fully enjoy the benefit and convenience by 3D printers.

Printing worry-free

All you need to do is set up the object you want to print in the software platform and put the materials in. Whether it takes hours or days to print, you can trust the printer to do the rest work for you.

Fast and easy

Assembly can be completed in 5 minutes, and the new product is 95% pre-assembled when it is out of the box. Print speeds up to 150mm/sec and nozzle travel speeds up to 200mm/sec, Every detail saves the creator’s troubles and worries.

Printing is as easy as post-

The temperature of the nozzle can reach 260, the temperature of the heating bed can reach 100, and the rapid heating in printing and the smooth stripping after printing are so simple.

TronHoo FDM 3D printer T300S Pro
Product performance overview

Large space

300 x 300 x 400 mm Large printing volume Being able to print objects covers a wider range of sizes, and your bigger ideas become bigger possibilities.

4.3” Color Touch Screen

4.3-inch full-color high definition large operating touch screen with a simple and intuitive interface with multifunction, friendly, and easy to operate.

Ultra Low Noise

High-performance TMC2209 motor drive system, no noticeable noise is generated during printing, for you can not be disturbed in the printing process.

Print Lighting

LED auxiliary lighting, observe printing status more clearly at any time.

Auto Leveling

Matrix auto-leveling with high precision distance sensors and dynamic leveling compensation can be done with just one click.

High precision configuration, high precision printing effect

Nozzle Diameter with 0.4mm, the layer thickness of 0.1-0.4 mm, and printing precision with X/Y axe: 0.05 mm and Z axe 0.1 mm.
The unmatched precision of print details is perfectly presented.

Compatible materials: PLA, PETG, ABS, TPU, and other linear filaments

The consistent quality guarantee

All the products developed by TronHoo and finally appear in the market as a complete product. They have been tested, inspected, used, upgraded and debugged countless times in the research and development stage in TronHoo professional laboratory, and every standard of all subsequent mass production will be consistent with the highest standard, it will not be somewhat lower, and may only raise the bar.

TronHoo FDM/FFF3D printer series comparison

Our product has made out of a very subdivided distinction between customer needs and scenario applications, to provide customers with a very refined demand configuration. If you have other product or service requirements, or our professional selection advice, please contact our technical team.