-
Pillowing
For models with a flat top layer, it is a common problem that there is a hole in the top layer, and there may also be uneven.
-
Gaps in Thin Walls
Generally speaking, a strong model contains thick walls and solid infill. However, sometimes there will be gaps between the thin walls, which cannot be firmly bonded together. This will make the model soft and weak that can’t reach the ideal hardness.
-
Poor infill
How to judge whether a print is good? The first thing that most people think of is to have a beautiful appearance. However, not only the appearance but also the quality of the infill is very important.
-
Layer Missing
During printing, some layers are partially or completely skipped, so there are gaps on the surface of the model.
-
Ghosting infill
The final print looks good, but the infill structure inside can be seen from the outer walls of the model.
-
Layer shifting or leaning
During printing, the filament did not stack up in the original direction, and the layers shifted or leaned. As a result, a part of the model was tilted to one side or the entire part shifted.
-
Poor Overhangs
After slicing the files, you start printing and wait for it to finish. When you go to the final print, it looks good, but the parts that are overhanging are a mess.
-
Poor Surface Beneath Supports
After finishing a model with some support, you remove the support structure, but they could not be moved completely. Small filament will remain on the surface of the print. If you try to polish the print and remove the remaining material, the overall effect of the model will be destroyed.
-
Supports Fell Apart
When doing a print that needs to add some support, if the support fails to print, the support structure will look deformed or have cracks, making the model unsupported.
-
Scars on Top Surface
When finishing the print, you will find some lines appear on the top layers of the model, usually diagonal from one side to the other.
-
Ringing
This is a subtly visual effect that the waves or rippling appear on the surface of the model and most people will overlook this small annoying issue. The position of the rippling appeared and the severity of this problem is random and unreasonable.
-
Blobs and Zits
WHAT’S THE ISSUE? During your printing process, the noz […]
